Genesys - Audio
| Manufacturer | Type | Comments |
| |
| Baldwin Boxall |
VIGIL EVAS Router |
Activate and deactivate zone via 485 port, each zone is a
button on the connected microphone, zones can be grouped
together to allow multiple zones or all zone calls, PTT button
on microphone must still be used to initiate audio, faults
from zones and router. |
| |
| Commend (Complus Teltronic) |
GE100, GE200 & GE700 |
Activate audio between handset and intercom (call point),
show calls from intercoms (Call Points), unlock doors on
intercoms, activate outputs (relays),
serial Connection to GE200/GE700 using V24 card,
bi-directional ASCII RS232 communication is used, C or D
revision cards are required in the exchange for master
handsets controlled by Genesys. |
| |
| ISM |
C2000 Concierge |
Select intercept, monitor and standby modes, manually call
flats (handsets) or entrances, unlock
entrances, one button entrances, connect flats to
entrances, tag flats, receive calls from entrances and flats,
memo facility, up to 16 blocks, compatible with the C2000
GNC, serial connection (485) to LNC in block using
2000/232-485 or RTS1, multiple workstation compatible
using master/slave design. |
| |
| ISM |
GNC |
Switch audio to blocks when using C2000 Concierge driver,
up to 16 blocks, serial connection (485) to GNC using
2000/232-485 or RTS1. |
| |
| ISM |
Ultimate Seltec Cell Call System |
Show cell audio calls/emergency calls/faults, cell watches,
prisoner database, night lights, guard reset, Dallas or key
button. |
| |
| ISM |
Ultimate Intercom and I/O |
Activate audio between instruments, display
calls/alarms/faults from instruments, unlock doors, show
alarms from MIO, activate outputs on MIO (relays), display
faults, concierge facility when using door entry, connect to
multiple exchanges when VOIP is used, cell call when used
with the Seltech driver, ability to link to PABX telephone
line, serial connection to exchange. |
| |
| ISM |
Ultimate Telephone Entry |
Select intercept, monitor and standby modes, manually call
flats (handsets), entrances, one button entrances, unlock
entrances, connect flats to entrances, tag flats, receive
calls from entrances and flats, memo facility, serial
connection to exchange, multiple workstation Compatible. |
| |
| ISM |
Ultimate General Alarms |
Shows alarm activation and fault alarms of GA point.
Communication Failures. Use of MIO with Ultimate system. |
| |
| ISM |
Ultimate Guard Tour |
Guard Tour points activated and configured from Genesys.
Exact timing or continued timings can be used. Use of Dallas Tag or single
button with LED indicator at each point. |
| |
| Lismore |
Cell Call 1 |
Show cell, priority and emergency alarms/calls from cells,
no audio functionality, serial connection to Lismore PC. |
| |
| Lismore |
Cell Call 2 |
Show cell, priority and emergency alarms/calls from cells,
no audio functionality, serial connection to Lismore RS232
interface. |
| |
| Zential |
Cell Call |
Activate Audio between handset and intercom (call point).
Show Calls from Intercoms (Call Points). Unlock Doors on Intercoms.
Activate outputs (relays).
Serial Connection to Zenitel unit. Alphanet data protocol is used.
|
| |
| Ivamax |
Zontec |
Activate Audio between handset and intercom (call point).
Show Calls from Intercoms (Call Points). Activate outputs (relays).
Serial Connection to exchange.
|
| |
|
|
|