Genesys - Matrix
| Manufacturer | Type | Comments |
| |
American
Dynamics |
MegaPower 1024 Video Matrix |
Switch cameras to monitors, PTZ control, wash/wipe, preset recall, auxiliary switching,
serial connection. |
| |
| Baxall |
ZTX80 Telemetry |
Switch cameras to monitors, PTZ control, serial connection. |
| |
| BBV |
Tx1000/1500 using Tx1000 protocol. |
Switch cameras to monitors, PTZ Control, wash/wipe,
preset recall, multiple PTZ
movement from multiple machines at same time, 128
cameras and 8 monitors available, serial connection.
If using a Tx1500 then Genesys connects to a
BBUS interface set to use the Tx1000 protocol.
|
| |
| BBV |
Tx1500 Protocol |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, multiple PTZ movement from multiple
machines at same time, 96 cameras and 64 monitors available.
Serial connection. |
| |
| BetaTech |
Videoblox Matrix |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, serial connection. |
| |
| Coe |
Telecommand Matrix (TCU16) |
Switch cameras to monitors, PTZ control, wash/wipe,
auxiliary switching, preset recall, video loss alarms,
keyboard alarms, multiple PTZ movement from multiple
machines at the same time, serial connection. |
| |
| Dedicated Micros |
BX2 Multiplexer |
Switch cameras to one spot monitor, PTZ control, select
layouts, serial connection. |
| |
| Ernitec |
System X Matrix (LON 1141, 1141CX, 1141SX) |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, auxiliary switching. Limitation that only one
camera can be moved at a time so separate connection for
each machine is recommended. Serial connection to Ernitec
convertor. |
| |
| Lederer |
Matrix |
Switch cameras to monitors, PTZ Control, serial connection. |
| |
| Meyertech |
Zone Vu (ZX250) |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, auxiliary switching, only one
camera can be moved at a time (separate connection for
each machine is recommended), serial Connection to ZX250. |
| |
| Molynx/Visilynx |
Matrix (PCCON3 Remote Control Protocol) |
Switch cameras to monitors, PTZ control, wash/wipe,
auxiliary switching, only one camera can be
moved at a time, PCCON3 protocol convertor may be
required, or some matrix can have this set up, serial
connection. |
| |
| Pelco |
CM6800/6700/9740 Matrix (ASCII Protocol) |
Switch cameras to monitors, PTZ control, wash/wipe,
auxiliary switching, preset recall/programming, camera title
programming, separate connection for each workstation is
recommended but not imperative, serial connection. |
| |
Burle/
Phillips/
Bosch |
Bosch Allegiant Matrix, All 8000 Series |
Switch cameras to monitors, PTZ control, wash/wipe,
auxiliary switching, preset recall/programming, multiple PTZ
movement from multiple machines at the same time, serial
connection. |
| |
| Synectics |
Matrix X2600 Protocol PC232 Unit |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, auxiliary switching, only one
camera can be moved at a time (separate connection for
each machine is recommended), connect using Synectics
PC232 unit, serial connection. |
| |
| Tecton |
Drax Multiplexer |
Switch cameras to one spot monitor, PTZ control, select
layouts, serial connection. |
| |
| Tyco |
TVNP |
Transport for London interface. |
| |
| Ultrak |
Maxpro MAX 1000 Matrix |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, auxiliary switching, serial connection. |
| |
| Vicon |
Video Matrix all Ranges from 2002 |
Switch cameras to monitors, PTZ control, wash/wipe,
preset recall, auxiliary switching, serial connection. |
| |
|
|
|